Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of FLEX NORYL™ Resin WCD801A - Asia - (PPE+TPE) - Saudi Basic Industries Corporation (SABIC)

Check here, which other Flex Noryl datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - Processing Recommendation Injection Molding - 機能

Any use of this information falls under the rules of our disclaimer.

商品の説明文

FLEX NORYL™ WCD801A resin is a flexible, non-reinforced, migration improved, extrudable blend of Polyphenylene Ether (PPE) + Thermoplastic Elastomer (TPE). This material contains non-halogenated flame retardant and performance capable of meeting UL VW-1 requirements, 80C end use temperature rating, and heat deformation performance as defined by UL 1581. FLEX NORYL WCD801A resin is intended for evaluation in wire insulation and cable jacket applications in dark colors. It has a Shore A Hardness reading of 80 and exhibits superior thermal stability, very low water absorption, good electric properties, and low specific gravity. Processing is typically conducted on standard extrusion equipment, and UL 1581 testing is conducted on 2.0mm wire with 0.12mm X 20 stranded copper conductor.

UL Yellow Card Link E207780-536311

Processing/Physical Characteristics	値	単位	テスト基準
ISO データ
溶融時の熱伝導率	0.2	W/(m K)	-
溶融時の比熱	2050	J/(kg K)	-
突き出し時の時の温度	68	°C	-
ASTM数据
メルトフローレイト, MFI	11	g/10min	ASTM D 1238
温度	250	°C	-
荷重	5	kg	-

機械的特性	値	単位	テスト基準
ISO データ
破壊応力	13	MPa	ISO 527
破壊ひずみ	50	%	ISO 527
ASTM数据
破壊応力	12	MPa	ASTM D 638
破断伸び	120	%	ASTM D 638
ショア硬さA	80	-	ASTM D 2240

熱的特性	値	単位	テスト基準
ISO データ
線膨張係数, 平行	87.4	E-6/K	ISO 11359-1/-2
線膨張係数, 直角	175	E-6/K	ISO 11359-1/-2
厚さhでの燃焼性	V-0	class	IEC 60695-11-10
試験片の厚さ	4.0	mm	-
グローワイヤ着火温度 (GWIT)	750	°C	IEC 60695-2-13
GWIT - 試験片の厚さ	3	mm	-

電気的特性.	値	単位	テスト基準
ISO データ
比誘電率, 1MHz	2.8	-	IEC 62631-2-1
誘電正接, 1MHz	40	E-4	IEC 62631-2-1
体積抵抗率	>1E13	Ohm*m	IEC 62631-3-1
耐トラッキング性	600	-	IEC 60112

その他の特性.	値	単位	テスト基準
密度	1100	kg/m³	ASTM D 792

Processing Recommendation Injection Molding	値	単位	テスト基準
Screw speed	15 - 85	rpm	-

機能

特殊な特性

添加剤.

難燃剤.

特殊な特性.

難燃.

領域別の利用可能性

アジア/太平洋地域.

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.